CLC Lubricants

Cutting and Grinding Oils

Chem Finish HX 65

(Carbide Grinding Oil)

CLC Lubricants has developed a chlorine free and sulfur free grinding oil for Carbide Grinding. Carbide Grinding, one of the most critical machining applications, develops a tremendous amount of heat. Without the proper oil burns will occur on the surface of the part. Chem Finish HX 65 grinding oil addresses this concern. The special additive package gives maximum lubricity. The additives are heat seeking, pulling the heat away from the wheel and the part. This in turn extends the life of the grinding wheel. Chem Finish HX 65 grinding oil can be used on carbide or tool steels.

  • Low Smoke
  • Chlorine Free
  • Sulfur Free
  • Low Odor
  • High Lubricity
  • Heat Seeking Additives
  • Increased Wheel Life
  • Operator Friendly
  • Eliminates Burn Marks on Drills
 

Chem Finish SYN 52

(Synthetic Carbide Grinding Oil)

CLC Lubricants has developed a chlorine free synthetic grinding oil for Carbide Grinding. Carbide Grinding is one of the most severe machining applications and develops a tremendous amount of heat. Without the proper oil, burns will occur on the surface of the part. Chem Finish SYN 52 synthetic grinding oil addresses this concern. The special additive package gives maximum lubricity. The additives are heat seeking, pulling the heat away from the wheel and the part. This in turn extends the life of the grinding wheel. Chem Finish SYN 52 grinding oil can be used on carbide or tool steels. Chem Finish SYN 52 has the added benefit of a high flash point to help reduce the possibility of a fire. In addition Chem Finish SYN 52 contains highly biodegradable synthetic basestocks and additives.

  • Low Smoke
  • Chlorine Free
  • Low Odor
  • High Lubricity
  • Heat Seeking Additives
  • Increased Wheel Life
  • Operator Friendly
  • Eliminates Burn Marks on Drills
 

Honing Oils

CHEM FINISH HO 30

Chem Finish HO 30 is a proven product developed for industrial honing applications. Chem Finish HO 30 provides excellent rust protection, fast stock removal and long stone and tool life. All these benefits contribute to excellent finishes. Chem Finish HO 30 may be used on many materials including most non-ferrous metals. DO NOT dilute and DO NOT use ordinary cutting oils, coolants or lube oils.

 
 

Chem Finish HO 31 LO

(Synthetic Carbide Grinding Oil)

Chem Finish HO 31 LO is a high performance honing oil formulated with a light viscosity base stock and high quality additives to increase cutting ability and provide fine finishes as well as in process rust protection. Chem Finish HO 31 LO has a clear appearance with very low odor.

  • Excellent Operator Acceptance
  • Clear, Clean Appearance
  • Excellent Lubricity
  • No Staining
  • Fast Cutting
  • Keeps Stones Clean
  • Excellent Rust Protection
  • Fine Finishes
  • Safe on all Ferrous & Non Ferrous Metals
  • Low Odor
 
   Site Map  |  Copyright 2005, CLC Lubricants Co
CLC Lubricants Co.
P.O. Box 764    Geneva, IL 60134
Phone: 800.543.0505   Fax: 630-232-7915
info@clclubricants.com
Rockford Office & Warehouse Phone: 815.874.4433