CLC Coolant CF-66 is a biostable micro- emulsion containing no biocides. It extends coolant life and does not contain any sulfonates. Therefore, the foul odors normally associated with oil containing coolants do not exist.

This coolant works on all metals, including stainless steel, cast iron, aluminum & copper based alloys.

CF-66 will keep your machine clean with no buildup or rust problems & rejects tramp oil like a synthetic lubricant.

CLC GRINDZ-ALL (EP) is a Universal Full Synthetic Coolant that can be used throughout the shop in any Machining or Grinding Operation. It's formulated for grinding both ferrous & non ferrous materials and is recommended when Grinding Carbide.

• Excellent Operator Acceptance
• Prevents Cobalt Leaching When Carbide Grinding
• Exceptional Rancidity Control
• Excellent Rust Protection
• Reduces Wheel Wear
• Forms Stable Dilution In Hard Or Soft Water
• Excellent Tramp Oil Rejection
• No Sticky Or Gummy Film Build-up On Machine
• Does Not Foam
• Drops Carbide Fines
• Contains EP Additive For Machining Operations

CLC Coolant 2205-R is a unique formula designed for grinding and polishing glass and plastic. CLC Coolant 2205-R mixes easily with water producing a clear blue, stable coolant with excellent rust protection. CLC Coolant 2205-R is formulated with additives resistant to foaming, bacterial and fungal growth. CLC Coolant 2205-R drops fines, keeps wheels clean and will not react with glass or plastic.

CLC Coolant 2224 EP is a synthetic, general purpose grinding and machining metal working fluid. This unique synthetic coolant is a new generation product with the following benefits.

CLC Coolant 2224 Plus is a synthetic, general purpose grinding and machining metal working fluid. This unique synthetic coolant is a new generation product with the following benefits.

CLC Coolant 2228 is a general purpose grinding and machining synthetic metalworking fluid. This unique synthetic coolant is a new generation product with the following benefits:

CLC Coolant 2449 is a completely proven and tested Full synthetic coolant designed for use on all metals from cast iron to aluminum.

CLC Coolant 2449 was specifically designed to have the same lubricity properties of an oil containing coolant.

Since it does not have any oil in it, CLC Coolant 2449 will not go rancid due to bacteria or fungus growth. CLC Coolant 2449 contains special bio resistant additives that are not considered "bug food", therefore, tank side treatment with biocides is not necessary.

CLC Coolant 2449 is also unique in that it has excellent rust protection for use with cast iron parts and also has enough oil-like lubricity so that it can be used on aluminum tapping.

CLC COOLANT CF 66 represents the newest technology in cutting fluids for the metalworking industry. CLC Coolant CF 66 is a biostable micro-emulsion containing no biocides. CLC Coolant CF 66 is a trouble free coolant that extends the life of your coolant dramatically. It does not contain any sulfonates; therefore, the foul odors normally associated with oil-containing coolants do not exist. CLC Coolant CF 66 will extend your tool life, reduce your down time and increase your profits.

CLC coolant CF 66 works on all metals including stainless steel, cast iron, aluminum and copper based alloys. CLC Coolant CF 66 will keep your machine super clean with no buildup or rust problems. CLC Coolant CF 66 rejects tramp oil just like a synthetic even though it is a high oil containing micro-emulsion.

Applications: Machining: milling, tapping, turning, drilling, boring, reaming, threading. Sawing: use in all applications where water extendable coolants are used. Grinding: centerless

CLC COOLANT CL 69 represents the newest technology in cutting fluids for the metalworking industry. CLC Coolant CL 69 is a biostable micro-emulsion containing no biocides. CLC Coolant CL 69 is a trouble free coolant that extends the life of your coolant dramatically. It does not contain any sulfonates; therefore, the foul odors normally associated with oil-containing coolants do not exist. CLC Coolant CL 69 contains a chlorinated EP additive that will extend your tool life, reduce your down time and increase your profits.

CLC Coolant CL 69 works on all metals including stainless steel, cast iron, aluminum and copper based alloys. CLC Coolant CL 69 will keep your machine super clean with no buildup or rust problems. CLC Coolant CL 69 rejects tramp oil just like a synthetic even though it is a high oil containing micro-emulsion.

Applications: Machining: milling, tapping, turning, drilling, boring, reaming, threading. Sawing: use in all applications where water extendable coolants are used. Grinding: centerless

CLC Coolant 4430 is a completely proven and tested semi-synthetic product designed for use in hard water of 10 grains/gallon (approximately 200 ppm and higher). Special chemical and physical lubricating properties are combined to provide excellent lubrication and the high degree of stability necessary for hard water. As a result, CLC Coolant 4430 provides the penetration, lubrication, stability, and cleanliness required. Also, this product is unique in that it provides a higher degree of rust protection than usual to protect machines and cast iron parts that are prone to rust due to hard water. CLC Coolant 4430 is recommended where chlorine will not be tolerated.

A complete series of field-test in machining and grinding high carbon steel, low carbon steel, aluminum, and stainless steel have proven the excellent performance and remarkable stability of CLC Coolant 4430.

CLC Coolant 4450 WG is a completely proven and tested semi-synthetic product designed for use in hard water of 10 grains/gallon (approximately 200 ppm and higher). Special chemical and physical lubricating properties are combined to provide excellent lubrication and the high degree of stability necessary for hard water. As a result, CLC Coolant 4450 WG provides the penetration, lubrication, stability, and cleanliness required. Also, this product is unique in that it provides a higher degree of rust protection than usual to protect machines and cast iron parts that are prone to rust due to hard water. CLC Coolant 4450 WG is recommended where chlorine will not be tolerated.

A complete series of field-tests in machining and grinding high carbon steel, low carbon steel, aluminum, and stainless steel have proven the excellent performance and remarkable stability of CLC Coolant 4450 WG.

CLC Coolant 4498 Plus is a completely proven and tested semi-synthetic product designed for use in hard water of 10 grains/gallon (approximately 200 ppm and higher). Special chemical and physical lubricating properties are combined to provide excellent lubrication and the high degree of stability necessary for hard water. As a result, CLC Coolant 4498 Plus provides the penetration, lubrication, stability, and cleanliness required. Also, this product is unique in that it provides a higher degree of rust protection than usual to protect machines and cast iron parts that are prone to rust due to hard water. CLC Coolant 4498 Plus is recommended where chlorine will not be tolerated.

A complete series of field-tests in machining and grinding high carbon steel, low carbon steel, aluminum, and stainless steel have proven the excellent performance and remarkable stability of CLC Coolant 4498 Plus.

CLC Coolant 656 is a general-purpose soluble oil for machining and grinding most alloys encountered in general shop operations. The high lubrication performance of CLC Coolant 656 is particularly effective in high speed machining operations, Using carbide tools. CLC Coolant 656 can be used on a wide variety of alloys, including aluminum, brass, copper steel and cast iron. It provides good cleaning action and eliminates dirty machine conditions of light and moderate duty soluble oils. CLC Coolant 656 is chlorine free and amine free and is safe on all metals including copper.

CLC Coolant R is specially compounded emulsifying oil composed of petroleum oil and a carefully balanced blend of emulsifying agents. It mixes readily with water in ratios as high as 50 parts water to 1 part oil. It forms homogenous and exceptionally stable emulsions, which show no apparent separation after long periods of use or storage.

CLC Coolant R is specially inhibited to provide strong rust preventative and anti-corrosion properties. Work pieces machined with emulsions of this oil ordinarily need no further protection during subsequent handling and manufacturing - nor do machines require special protection.

The superior cooling properties of CLC Coolant R soluble oil produces clean water, excellent surface finish and minimum tool wear. Emulsions of CLC Coolant R soluble oil have a wide range of used in metal working - rough turning, boring, milling, sawing, drilling, grinding, threading, stamping and drawing.

CLC Lubricants is now offering one of the most unique advancements in High Performance Vegetable Based Technology. CLC Coolant VG 5000 is a water-soluble oil, metalworking coolant designed with no petroleum oils. CLC Coolant VG 5000 is made with natural oils instead of petroleum oils providing one of the safest products available for CNC machining of all metals.