CLC Lubricants has formulated CARB "O" GRIND NB1206 to address one of the most difficult Grinding operations, (Carbide Grinding)

Carb-O-Grind NB1206 is formulated with a non-cobalt leaching amine, biologically resistant rust preventive soaps, a proprietary synthetic antiwear agent, nonferrous corrosion inhibitor, and biocide to give optimum carbide grinding performance. The antiwear agent has inverse temperature water solubility such that it plates out to lubricate the grinding interface and defoam. Below the grinding temperature it returns to solution in the sump.

In Carbide grinding, there are many factors to consider. With the use of Super Abrasive Wheels, there is a tremendous amount of heat that can be generated to the work piece. This heat is usually responsible for the premature wear of the Grinding wheel, and can directly affect the surface finish and integrity of the work piece. CARB "O" GRIND NB1206 addresses this concern with the following additional benefits.

CLC Lubricants has formulated CARB "O" GRIND 65 to address one of the most difficult Grinding operations, (Carbide Grinding)

Only the most severely hydro-treated base stock oils are used in this premium grinding oil. CARB "O" GRIND 65 water like clarity, will give you a clean clear look at your grinding operation. . You will also find CARB "O" GRIND 65's low odor non offensive in your grinding facility. CARB "O" GRIND 65 is available in three viscosity grades, or can be compounded to customer's unique specifications. CARB "O" GRIND 65's highly refined chemistry will give you a stable highly oxidative resistance grinding oil for long life and excellent filterability with low evaporation.

In Carbide grinding, there are many factors to consider. With the use of Super Abrasive Wheels, there is a tremendous amount of heat that can be generated to the work piece. This heat is usually responsible for the premature wear of the Grinding wheel, and can directly affect the surface finish and integrity of the work piece. CARB "O" GRIND 65 addresses this concern with the following additional benefits.

Site samples of CARB "O"GRIND 65 are available at the Customer's request!

CLC Lubricants has formulated Carb O Grind L to be utilized in the grinding process for both ferrous & non ferrous materials in filtration systems where one micron filtration must be obtained.

Carb O Grind L is a high purity, linear saturated mixture of paraffins field tested and guaranteed by CLC LUBRICANTS for use in One Micron filtration systems.

Site samples of CARB "O"GRIND L are available at the Customer's request!